Macchine

LASER CUTTER

Full Spectrum Pro LF Series 36×24 CO2 Laser with RetinaEngrave 3D Ethernet

Engraving Area 36″x24″
Work Area 36″x24″
Machine Dimensions 54″x40″x42″
Laser Type Sealed CO2 laser tube
Net Weight 220kg / 484lbs
Laser Power 60 (90W, 120W, 150W)
Power Supply AC 110V Native (220V Option Available)
Gross Power Less than 1000W
Driving System Stepper
Cooling Mode Water-cooling and protection system
Operating Temperature 0 – 45°C
Z table Motorized Z w/ Autofocus (up to 16.5″)
Auxillary Equipments Exhaust-fans, Air-exhaust pipe
Controlling Software RetinaEngrave USB Direct Print Drivers (100% USA Software)

CNC ROLAND MDX-15

Table size 8-5/8″(X). x 6-1/4″(Y) / (220 mm x 160 mm)
Maximum operating area 8 “(X) x 6 ” (Y) x 2-3/8″ (Z) /( 203.2mm x 152.4mm x 60.5mm)
External dimensions 18-13/16″(W) x 15-1/16″ (D)x 12-1/16″(H) / (476.8 mm x 381.6 mm x 305 mm)
Modelling functions
Spindle speed (fixed) 6500 rpm
Feedrate 0.00393 to 9/16 in./sec. (0.1 to 15 mm/sec.)
Software resolution 0.000984 in./step (0.025 mm/step)
Mechanical resolution 0.000246 in./step (0.00625 mm/step)
Scanning functions
Probe length 60 mm (2-5/16 in.), tip bulb diameter 0.08 mm (0.00315 in.)
Scanning speed 4-15 mm/sec. (1/8-9/16 in./sec.)
Exportable file formats DXF, VRML, STL, 3DMF, IGES, Grayscale, Point Group and BM

VINYL CUTTER ROLAND CX-24

Driving method Digital control servo motor
Cutting method Media-moving method
Acceptable media width: 2” to 27.5” (50 to 700mm)
Maximum cutting area: Width:22.9” (584mm) Length: 984” (25m)
Acceptable tool: Special blade for CAMM-1 series
Maximum cutting speed: 20ips all directions (500mm/sec)
Cutting speed: 4 to 20ips (10 to 500mm/sec)
Blade force: 30 to 250gf
Mechanical resolution: 0.000492” (0.0125mm)
Software resolution: 0.000984” (0.025mm)
Distance accuracy(1): Error of less than +/- 0.2% of distance traveled, or +/- 0.004” (+/- 0.1mm), whichever is greater
Repetition accuracy (1)(2): +/- 0.004” (+/- 0.1mm) or less
Alignment accuracy for printing and cutting when loading printed material (1) (3): +/- 0.04” (+/- 1mm)

Falla 3D Printer

Resolution: Accurate printing up to 50 micron (0.05 mm). XY placement 15 micron, Z placement 5 micron.

Speed: Silent and fast printing, up to 200 mm/s!

Filament: The printer is compatible with all kinds of filament, including PLA, ABS, Nylon, HIPS, PVA.

Size: Falla 3D is scalable up to a 90x60x60 cm printing area (Printer size 100x70x70 cm) (optional parts required)

Extruder: Double Extruder With a single FUM hotend, with a classic double 3mm hotend or with a 1.75 Bowden system. (optional parts required)

WiFi Connection: Wireless printing through Octoprint, without using PC. (optional parts required)

CNC SHAPEOKO 2 (CUSTOM BUILD)

Workarea: 1800mm x 900mm x 60mm

Size: 2000mm x 1000mm

Resolution X Y: 40 steps x mm

Resolution Z: 320 steps x mm

Rotary Tool: Kress 1050 (1000W)

CNC ROLAND SRM-20

Cuttable Material Modeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board
X, Y, and Z Operation Strokes 8 (X) x 6 (Y) x 2.38 (Z) inches,
203.2 (X) x 152.4 (Y) x 60.5 (Z) mm
Workpiece table size 9.14 (X) x 6.17 (Y) inches,
232.2 (X) x 156.6 (Y) mm
Distance From Collet Tip to Table Maximum, 5.15 in
(130.75mm)
Loadable Workpiece Weight 4.4 lbs (2kg)
X-, Y-, and Z-Axis Drive System Stepping motor
Operating Speed 0.24 – 70.87inch/min,
6 – 1800mm/min
Software Resolution 0.000039 inches/step (RML-1), 0.000039 inches/step (NC code),
0.01 mm/step (RML-1), 0.001mm/step (NC code)
Mechanical Resolution 0.0000393 inches/step,
0.000998594 mm/step
Spindle Motor DC motor Type 380
Spindle Rotation Speed Adjustable 3,000 – 7,000 rpm
Cutting Tool Chuck Collet method
Interface USB
Control Command Sets RML-1, NC code

CNC ROLAND iModela
Material that can be cut Soft material such as resins (conductive materials such as metals and carbons are not supported).
Maximum Milling Area X, Y, and Z: 3.39 x 2.17 x 1.02 inches (8 x 55 x 26 mm)
Distance from Collet tip to table Maximum 2.17 inches (55 mm)
Table size Width x depth: 3.39 x 2.17 inches (86 x 55 mm)
Mountable cutting material weight 0.4 lb (200 g)
X-, Y-, and Z-axis drive system Stepping motor
Operating speed X and Y axes: 0.24 to 9.45 inches/min (6 to 240 mm/min)
Software resolution 0.00039 inches/step (0.01 mm/step; RML-1),0.000039 inches/step (0.001 mm/step: NC code)
Mechanical resolution 0.00000732 inches/step (0.000186 mm/step: micro steps)
Spindle motor iM-01 spindle motor
Interface USB (compliant with Universal Serial Bus Specification Revision 2.0 Full Speed)
Control command set RML-1, NC code